This guide shows how to do this with Windows 7. Most documents on the web are only for Windows XP/2000.
You need to download and install openssl 0.9.8.
http://www.ie7pro.com/openssl/openssl-dll-0.9.8g_x64.zip
First you need to generate the Cert Request.
by default, openssl.exe is located at C:\ > openssl > bin.
Issue this command: OpenSSL>req -config "C:\OpenSSL\bin\openssl.cfg" -new -newkey rsa:2048 -nodes -keyout mykey.pem -out myreq.pem
Provide all information. The important fiels is the "Common Name". This will need to match up with the DNS name that resolves to the virtail IP address of the WLC. Make sure to note the password that you set.
After you provide all the required details, two files are generated:
- a new private key that includes the name mykey.pem
- a CSR that includes the name myreq.pem
After you submit the CSR to the third-party CA, the third-party CA digitally signs the certificate and sends back the signed certificate chain through e-mail. In case of chained certificates, you receive the entire chain of certificates from the CA. If you only have one intermediate certificate in our example, you receive these three certificates from the CA:
- Root certificate.pem
- Intermediate certificate.pem
- Device certificate.pem
Once you have all the three certificates, copy and paste into another file the contents of each .pem file in this order:
------BEGIN CERTIFICATE------
*Device cert*
------END CERTIFICATE------
------BEGIN CERTIFICATE------
*Intermediate CA cert *
------END CERTIFICATE--------
------BEGIN CERTIFICATE------
*Root CA cert *
------END CERTIFICATE------
Save the file as All-certs.pem.Combine the All-certs.pem certificate with the private key that you generated along with the CSR (the private key of the device certificate, which is mykey.pem in this example), and save the file as final.pem.
Issue these commands in the OpenSSL application in order to create the All-certs.pem and final.pem files:
openssl>pkcs12 -export -in All-certs.pem -inkey mykey.pem -out All-certs.p12 -clcerts -passin pass:check123 -passout pass:check123 openssl>pkcs12 -in All-certs.p12 -out final-cert.pem -passin pass:check123 -passout pass:check123
Note: In this command, you must enter a password for the parameters -passin and -passout . The password that is configured for the -passout parameter must match the certpassword parameter that is configured on the WLC. In this example, the password that is configured for both the -passin and -passout parameters is check123.
final.pem is the file that we need to download to the Wireless LAN Controller. The next step is to download this file to the WLC.
Download the Third-Party Certificate to the WLC using the CLI
Complete these steps in order to download the chained certificate to the WLC using the CLI:
- Move the final.pem file to the default directory on your TFTP server.
- In the CLI, issue these commands in order to change the download settings:
>transfer download mode tftp >transfer download datatype webauthcert >transfer download serverip <TFTP server IP address> >transfer download path <absolute TFTP server path to the update file> >transfer download filename final.pem - Enter the password for the .pem file so that the operating system can decrypt the SSL key and certificate.
Note: Be sure that the value for certpassword is the same as the -passout parameter password that was set in step 4 of the Generate a CSR section. In this example, the certpassword must be check123.>transfer download certpassword password - Issue the transfer download start command in order to view the updated settings. Then enter y at the prompt in order to confirm the current download settings and start the certificate and key download. Here is an example:
(Cisco Controller) >transfer download start Mode............................................. TFTP Data Type........................................ Site Cert TFTP Server IP................................... 10.77.244.196 TFTP Packet Timeout.............................. 6 TFTP Max Retries................................. 10 TFTP Path........................................./ TFTP Filename.................................... final.pem This may take some time. Are you sure you want to start? (y/N) y TFTP EAP Dev cert transfer starting. Certificate installed. Reboot the switch to use new certificate. - Reboot the WLC in order for the changes to take effect.
