You are sometimes in the position where you have just configured DHCP or DNS for AP discovery and you need the AP to get an IP address and start the discovery process.
You can reboot the AP, or you can release and renew to start the process without the need for a reboot...
release dhcp f0
renew dhcp f0
This Blog is for my own personal notes during my quest for CCIE Wireless. Some of it is probably not correct but I will change it when I realise! Feel free to add comments if you disagree with something or wish to add anything! Thanks Phil
Search This Blog
Monday, 18 April 2011
Friday, 8 April 2011
Reboot your Autonomous AP's !
I spent the best part of an hour today trying to work out why a bridge link would not pass traffic. The config was right. I did a reboot, and it all started working.
So, if you think its set up and its not working...REBOOT!
So, if you think its set up and its not working...REBOOT!
Wednesday, 6 April 2011
WCS - Password Recovery
On the WCS got c:\program files\wcsfolder\bin
passwd root-user (newpass)
passwd root-user (newpass)
Subscribe to:
Posts (Atom)